RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050247 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  Rear Power Window LH does not Operate with Rear Power Window Switch LH  


DESCRIPTION

When the ignition switch is ON, the rear power window regulator motor assembly LH is operated by the rear power window regulator switch assembly LH.

WIRING DIAGRAM

B341201
0.146,0.469 1.979,0.667 1.833,0.198 10 from POWER Relay 2.26,0.656 3.49,0.854 1.229,0.198 10 DOOR R/L 0.188,2.479 0.5,2.677 0.313,0.198 10 L3 0.167,2.667 2.052,3.031 1.885,0.365 10 Rear Power Window Regulator Motor Assembly LH 2.365,2.49 2.677,2.688 0.313,0.198 10 L1 2.344,2.698 4.24,3.063 1.896,0.365 10 Rear Power Window Regulator Switch Assembly LH 4.938,2.698 6.469,2.896 1.531,0.198 10 J5 4.938,2.875 6.938,3.219 2,0.344 10 Power Window Regulator Master Switch Assembly 3.354,1.667 3.51,1.865 0.156,0.198 10 B 3.438,1.802 3.75,2 0.313,0.198 10 SU 3.427,2.167 3.74,2.365 0.313,0.198 10 SD 1.531,1.677 1.688,1.875 0.156,0.198 10 1 1.313,1.885 1.469,2.083 0.156,0.198 10 U 1.313,2.26 1.469,2.458 0.156,0.198 10 D 1.531,2.042 1.688,2.24 0.156,0.198 10 2 2.708,1.677 2.865,1.875 0.156,0.198 10 4 2.729,2.052 2.885,2.25 0.156,0.198 10 1 2.917,1.677 3.073,1.875 0.156,0.198 10 U 2.906,2.063 3.063,2.26 0.156,0.198 10 D 3.354,1.458 3.51,1.656 0.156,0.198 10 3 3.698,1.781 4.01,1.979 0.313,0.198 10 5 3.698,2.188 4.01,2.385 0.313,0.198 10 2 5.094,1.875 5.406,2.073 0.313,0.198 10 U 5.104,2.083 5.417,2.281 0.313,0.198 10 D 4.792,1.76 6.323,1.958 1.531,0.198 10 12 4.781,2.156 6.313,2.354 1.531,0.198 10 13
from POWER Relay
DOOR R/L
L3
Rear Power Window Regulator Motor Assembly LH
L1
Rear Power Window Regulator Switch Assembly LH
J5
Power Window Regulator Master Switch Assembly
B
SU
SD
1
U
D
2
4
1
U
D
3
5
2
U
D
12
13

CAUTION / NOTICE / HINT

NOTICE:
·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Check that the window lock switch is off before performing the following procedure.



PROCEDURE

1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH
a.

Remove the rear power window regulator switch assembly LH.

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>REMOVAL


b.

Inspect the rear power window regulator switch assembly LH.

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

NG

REPLACE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>REMOVAL


2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
a.

Remove the rear power window regulator motor assembly LH.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>REMOVAL


b.

Inspect the rear power window regulator motor assembly LH.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH - BATTERY)

NG

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>REMOVAL


3.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH - BATTERY)
a.
B276367
0.188,0.906 0.458,1.208 0.271,0.302 1.688,1.677 1.677,1.292 true 0.083,0.104 0.396,0.302 0.313,0.198 10 *a 0.271,0.99 0.583,1.188 0.313,0.198 10 L1 1.656,1.688 1.813,1.885 0.156,0.198 10 B
*a
L1
B
*a Front view of wire harness connector
(to Rear Power Window Regulator Switch Assembly LH)


Disconnect the rear power window regulator switch assembly LH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
L1-3 (B) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH - REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH - REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH)
a.

Disconnect the L3 rear power window regulator motor assembly LH connector.


b.

Disconnect the L1 rear power window regulator switch assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L3-1 (U) - L1-4 (U) Always Below 1 Ω
L3-2 (D) - L1-1 (D) Always Below 1 Ω
L3-1 (U) or L1-4 (U) - Body ground Always 10 kΩ or higher
L3-2 (D) or L1-1 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)
a.

Disconnect the L1 rear power window regulator switch assembly LH connector.


b.

Disconnect the J5 power window regulator master switch assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L1-5 (SU) - J5-12 (U) Always Below 1 Ω
L1-2 (SD) - J5-13 (D) Always Below 1 Ω
L1-5 (SU) or J5-12 (U) - Body ground Always 10 kΩ or higher
L1-2 (SD) or J5-13 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR